Micro Adjust Control Head Cable

Micro Adjust Cables

Micro Adjust control heads are ideal for remote operation of a throttle, regulating valve, or other applications needing precise adjustment capabilities. Depressing the center button allows pushing or pulling the knob to make course travel adjustments. A flexible dust seal protects the internal release mechanism. Rotating the knob clockwise extends the output in the finite mode, and counter-clockwise retracts. Four and one-half turns results in 1" of linear travel. The maximum recommended load is 20lbs. Normal vibration does not affect the micro adjust setting. An optional friction lock accessory is available for applications where vibration is excessive. A disconnect feature and various output end configurations are available to suit a particular application. The ordering code and technical description show these choices.

Applications

  • Throttle control
  • Regulating valve

Features

  • Load: 20lb maximum
  • Travel: 3.00" maximum
  • Threaded mount
  • Friction lock
  • Disconnect
Twist Lock Control Head Cable

Twist Lock Cables

These Twist Lock control heads are a robust and simple design – only one moving part. The T-handle is free to travel the full length of the control until locked. Rotating the T-handle 1/8 turn in either direction along the travel will secure loads up to 100lb, and yet unlocks with ease. They are cost effective solutions to mechanically connecting and locking a manual input source to a remote output, especially when space is limited or rod linkage and bell cranks are not suitable choices. The ordering code and technical description shows the numerous choices available to meet customer requirements.

Applications

  • Engine shut down
  • Engine choke
  • Latch operation
  • Valve operation

Features

  • Load: 100lb maximum
  • Travel: 3.00" maximum
  • Threaded mount
Non-Lock Control Head Cable

Non-Lock Cables

Non-lock control heads are designed for remote engine shutdown/choke, latch/valve operation, and numerous other applications. These panel or bracket mounted units are intended for light to moderate loads. They are cost effective solutions to mechanically connecting a manual input source to a remote output, especially when space is limited or rod linkage and bell cranks are not suitable choices. Various T-handles/knobs with or without functional identifications, as well as output end configurations are available. The ordering code and technical description shows the numerous choices.

Applications

  • Engine shut down
  • Engine choke
  • Latch operation
  • Valve operation

Features

  • Load: 50lb maximum
  • Travel: 3.00" maximum
  • Threaded mount

WARNING

Since the manufacturer is unable to determine all applications in which a part may be placed, it is the user’s responsibility to determine the suitability of the part for its intended use.This is especially true where safety is a factor. Incorrect application or installation may result in property damage, bodily injury, or death. For technical assistance, call 260-749-5105.